Measurement of Optical Parameters of Turbid Media
|
Description Visible light and short-wave infrared (SWIR) light between 400 and 1600nm can penetrate into turbid samples, including most human soft tissues such as skin, with larger depth for longer wavelength and therefore offers potential spectral windows for functional imaging and medical monitoring without ionizing radiation hazards. A fundamental challenge in achieving medical application of the visible and SWIR light is to understand the relation between the optical response of the skin and its characteristic parameters defined with accurate optical models. The light propagation in a strongly turbid sample such as the skin can be accurately analyzed at the macroscopic scales (>~0.1mm) by the radiation transfer model originated from study of light transportation in atmosphere. Our experimental
study of light interaction with turbid media has been focused on the determination
of four optical parameters, scattering coefficient ms, absorption
coefficient ma, anisotropy factor g (assuming a HG
function as the scattering phase function) and refractive index based on the radiative transfer and effective medium theories. To
determine these optical parameters, one has to solve an inverse problem which
requires accurate measurement of optical signals from a turbid sample and accurate
numerical modeling. Our general
approach is to use either an integrating sphere based system or a reflectance
imaging based system to measure the distribution of scattered light signals from
the sample excited with a monochromatic incident light beam followed by a Monte
Carlo based modeling method to accurate simulate the light signals. Using the
squared difference between the measured and simulated signals as an objective
function, an iteration process is pursued by an inverse algorithm to modify
the optical parameter values used in the Monte Carlo simulations until the
objective function is minimized to satisfactory. An automated reflectometer has been developed to measure the coherent reflectance
Rc as a function of incident angle q. By comparing the
measured Rc(q) curve with the calculated one based on the Fresnel
equations for s- and p-polarized incident light beam, we can determine the
complex refractive index n of a turbid sample. The integrating
sphere based method can be used as an in vitro method to acquire light
signals such as diffuse transmittance Td, diffuse reflectance Rd
and collimated transmittance Tc. When
combined with the Monte Carlo modeling, this method can lead to a quick
convergence in the inverse calculation to optimized values of optical
parameters. Its disadvantage lies in the need of transmittance signals which often requires the samples be cut off and
sliced into thin slabs. We have developed another reflectance imaging based method
using one imaging detector such as a CCD camera. Compared to the integrating
sphere method, it needs only one image of reflected light signals from the
probed site and thus can be performed in a in vivo fashion without no requirement
of sample preparation. However, the challenge to find an efficient inverse
algorithm to guide the process of determination of optical parameters from
one reflectance image data is quite challenging. We have demonstrated recently
that the optical parameters can be uniquely determined from one reflectance
image and search for more efficient inverse algorithm is underway. |
|
Publications ·
Y. Du, X.H. Hu, M. Cariveau, X.Ma, G.W. Kalmus, J. Q.
Lu, "Optical Properties of Porcine Skin Dermis between 900nm and
1500nm", Physics in Medicine and Biology, 46, 167-181
(2001) ·
X. Ma, J.Q. Lu, R. S. Brock, K.M. Jacobs, P. Yang, X.H.
Hu, “Determination of Complex Refractive Index of Polystyrene Microspheres
from 370 to 1610nm”, Physics in Medicine and Biology, 48,
4165-4172 (2003) ·
X. Ma, J.Q. Lu, H. Ding, X.H. Hu, “Bulk Optical
Parameters of Porcine Skin Dermis Tissues at 8 Wavelengths from 325 to
1557nm”, Optics Letters, 30,
412-414 (2005) ·
H. Ding, J.Q. Lu, K.M. Jacobs, X.H. Hu,
"Determination of Refractive Indices of Porcine Skin Tissues and Intralipid at 8 Wavelengths between 325 and 1557nm",
Journal of the Optical Society of America A, 22,
1151-1157 (2005) ·
H. Ding, J.Q. Lu,
W.A. Wooden, P.J. Kragel, X.H. Hu, “Refractive
indices of human skin tissues at eight wavelengths and estimated dispersion
relations between 300 and 1600 nm”, Physics in Medicine and Biology, 51,
1479-1489 (2006) ·
C. Chen, J.Q.
Lu, H. Ding, K.M. Jacobs, Y. Du, X.H. Hu, “A primary method for determination
of optical parameters of turbid samples and application to intralipid between 550 and 1630 nm”, Optics Express, 14, 7420-7435 (2006) |